Overview
Setting the temperature on your Kenmore Elite refrigerator can be a quick and simple process depending on the model you have. Whether you need to cool down or warm up your refrigerator, knowing how to change the temperature is key to having a functional kitchen appliance. In the following overview, you will learn the steps and techniques you need to take to change the temperature settings on your Kenmore Elite refrigerator.
Overview of the Kenmore Elite Refrigerator
The Kenmore Elite Refrigerator offers an array of features for convenient and efficient performance. It provides a fast-cool feature to quickly cool product, the capability to customize temperature settings for different shelves, and an adjustable room thermometer to maintain constant temperatures in your fridge. With these functions and more, the Kenmore Elite Refrigerator ensures your foods stay fresher longer.
To ensure accuracy and optimal performance of the refrigerator, regular calibration should be done. Calibration instructions may vary depending on the model refrigerator you have. To change the temperature settings in your fridge, begin by reading your owner’s manual first—this will explain all the steps needed to adjust them appropriately. Once you are familiar with your refrigerator model’s specific calibration instructions, perform them following all safety guidelines given in the manual. To change the temperature setting on a Kenmore Elite Refrigerator:
1.Press and hold down any 2 of 4 buttons simultaneously for 5 seconds or until “SET” light appears in display window to enter Temperature Setting mode
2.Rotate black temperature knob above/below arrow symbol left/right to increase/decrease lower compartment’s setpoint temperature accordingly
3.Turn gray top section knob above control buttons further left or right as desired to increase/decrease upper compartment’s setpoint temperature
4.Allow approximately 24 hours before using appliances after calibration is completed
5.Re-calibrate if temperatures remain consistently off or vary drastically without reasonable cause after giving it 24 hours
6 For safety reason no food should be stored longer than 24 hours at any setting lower than 38°F (3°C)
Changing Temperature Settings
Kenmore Elite refrigerators have the option to customize your temperature settings. This allows you to regulate your refrigerator’s coldness and keep your food fresh. In this guide, we will explain the steps you need to take to adjust the temperatures on your Kenmore Elite refrigerator.
Locate the temperature control panel
Changing the temperature settings on a Kenmore Elite refrigerator is relatively straightforward. Locate the temperature control panel, which can be found on the front of the inside of your refrigerator. Most Kenmore Elite refrigerators have either a digital or manual dial, depending on your model.
If your fridge has a digital display, you can use the Up and Down arrows to select your desired temperature for each compartment (fridge and freezer). The ideal fridge temperature should be set between 36°F-38°F; freezers should be set at or below 0°F.
If you have a manual dial temperature control, you will need to locate the coldest setting (it is usually labeled as “Colder”) and turn it until it reaches the coldest setting where an arrow is pointing “Up”. This will ensure that both compartments properly maintain their temperatures according to Food and Drug Administration guidelines for food safety. Make sure to read any additional instructions that may come with your specific model fridge before making changes.
Adjust the temperature settings
The most efficient way to ensure that your food is kept at the correct temperature is to adjust the temperature settings on your Kenmore Elite refrigerator. To successfully do this, follow the steps outlined below:
1. Locate the control panel located inside of your fridge by looking at the underside of one of the shelves located in one of its doors.
2. Access the control panel by pressing and holding on to it firmly while rotating it in a counterclockwise motion.
3. Use a Phillips-head screwdriver that fits into holes located on either side of the control panel to unlock it and gain access circuitry within it.
4. Once you have gained access to the circuitry, use a small flat-head screwdriver to turn dials located within to set desired temperatures for various compartments inside your refrigerator, such as fresh food, freezer, water and air temperatures. Every compartment should have its own dial/setting for this purpose as indicated by symbols on each side of it or words with numbers beside them showing current temperature status (depending on model). Note +’s increase temperature while -’s decrease temperatures.
5. Once desired settings are noted and saved, press down gently on top part of control unit until lock/release button is heard clicking into position signaling end of instructions for adjusting controller settings for said appliance component(s). You have now adjusted temp settings for various compartments within refrigerator using controls found inside device. Enjoy newly re-calibrated freshness!
Confirm the new temperature settings
Once you have entered your new temperature settings, you will need to confirm them. Press the “SET” or “OK” button on the display panel. Your refrigerator’s temperature may take some time to reach the desired setting, and this process can vary from model to model. Monitor the internal temperature of your refrigerator and check it against a reliable thermometer over the course of several hours to make sure that your settings have taken effect. Additionally, if you experience any inconsistencies with temperatures in different sections of your fridge, you may need to recalibrate all shelving units as well.
Troubleshooting
If your Kenmore Elite refrigerator isn’t cooling correctly, the first thing you should do is troubleshoot the problem. This involves looking at the appliance’s temperature control settings to see if there is something wrong. In this section, we will discuss how to change the temperature settings on your Kenmore Elite refrigerator so you can troubleshoot and get your appliance running at the correct temperature again.
Check the door seals
In any type of refrigerator it is important to make sure that the door seals are keeping a snug fit. If the door doesn’t close all the way, air will enter the inside chamber, reducing its efficiency and potentially leading to frozen foods if the temperature drops too low. Check all of the edges of your refrigerator and freezer doors and remove any buildup that could be blocking it from closing properly. Using a damp cloth to wipe them down weekly should keep these areas clean as well as help maintain a tight seal on your doors.
If your door still won’t close or holds with difficulty, you may need to replace the door gaskets or seals. Depending on what type of appliance you have, there may be an adhesive strip around each seal that may need replacing as well. Replacement parts should be bought through your model’s dealer or service channel since they are specifically designed for your make and model refrigerator
If all else fails, you should call a professional repair service immediately! It is not recommended to try major repairs independently that can have an impact on safety components such as door seals – leave it up to certified technicians to ensure proper maintenance for your appliance.
Check the condenser coils
The condenser coils on your refrigerator play an important role in helping your unit maintain a desired temperature. Be sure that the condenser coils underneath the refrigerator are free of dust and debris, as this buildup can act as insulation and keep the coils from cooling efficiently. Cleaning should be done with a refrigerator coil brush.
The fans inside the cabinet may also need to be checked for obstructions or dust buildup, including nest material from rodents or birds. Make sure to visually inspect both the fan blades and fan motor for any signs of wear, and make sure there are no objects blocking the fan’s motion.
If you find that neither the fan nor the condenser coils are blocked by debris, check to see if they’re firmly attached to the back wall of your fridge. If they’re not securely fastened, use a screwdriver or small adjustable wrench to tighten them up so they can do their job properly.
It is important to remember that running either appliance without good air circulation will drastically reduce its efficiency or cause it to experience complete mechanical failure.
Check the evaporator fan
The evaporator fan circulates the cold air from the freezer and helps maintain even cooling temperatures throughout your Kenmore Elite refrigerator. Ideally, you should check the fan for proper operation after any major repair or system adjustments. If the fan does not appear to be working properly, it could cause your refrigerator’s temperature to fluctuate.
To check if your evaporator fan is working properly, open the right-hand side freezer door and locate the evaporator fan at the back of the compartment (above the top shelf). Pull out the shelf closest to it and look behind. You may need a flashlight so that you can verify if it is running correctly and without making any noise. If it is not working correctly or making unusual noises, then this could be causing fluctuations in temperature within your refrigerator. In order to replace your evaporator fan, contact an authorized service technician as soon as possible.
Maintenance
Maintaining your Kenmore Elite refrigerator is key to keeping it running optimally. This includes setting the temperature to the right level. If your refrigerator is running too cold or too warm, there are a few simple steps you can take to adjust the temperature and get it back to proper working order. Let’s take a look at how to change the temperature on your Kenmore Elite refrigerator.
Clean the condenser coils
Condenser coils are responsible for expelling heat and maintaining a comfortable temperature in your refrigerator. Over time, however, condenser coils can accumulate dust and dirt particles, reducing the refrigerator’s efficiency and leading to higher energy bills. Cleaning the condenser coils regularly is important for keeping your fridge running smoothly.
To clean the condenser coils on your refrigerator, start by unplugging the unit. Pull it away from the wall so you have an easier time accessing and cleaning the back panel of the unit. Then, using a damp cloth and a vacuum cleaner set to a low suction setting, carefully clean any build-up on all accessible parts of the condenser coils, paying special attention to areas around fans or other vents where dirt can accumulate more easily. Finally, wash down all surfaces gently with a mixture of mild detergent and water before wiping them dry thoroughly with an absorbent cloth.
Replace the air filter
Replacing the air filter in your Kenmore Elite refrigerator will help ensure that the refrigerator’s temperature is uniform throughout the unit. The filter should be changed at least once every six months, depending on use. To replace the air filter:
1. Locate the air filter access panel at the top right-hand corner of your refrigerator. Open it by pushing down on the recessed locking tab and pulling open the panel.
2. Inside you will find a white rectangular air filter with a handle on one side. Pull it out of its compartment and discard it in an appropriate manner, as some models will use charcoal filters which can’t be recycled or reused in other applications.
3. Take care to note which way up you take it out, as there are directional arrows on either side to show this – if you replace it upside down, you may notice poor performance from your refrigerator due to inefficient airflow across its components.
4. Replace this with an approved replacement for your model – these can be bought from most stores selling appliances, or from Kenmore directly if unsure of what size to buy for your appliance model number.. Once you have inserted it into its compartment correctly – noting any directional arrows – firmly close and lock down the cover panel over it, using this until you hear a solid click before testing your chill settings again after resetting all settings back and allowing a few hours for them to stabilize temperature-wise before making any adjustments manually (if necessary).
Clean the refrigerator interior
In order to change the temperature on your Kenmore Elite refrigerator, it is important to first clean the refrigerator interior. Start by removing any food items and shelves, and then vacuum away any dirt or dust buildup in the interior of the refrigerator. Next, use a mild cleaner and damp cloth or sponge to wipe away any fingerprints or spills. Make sure to dry the surfaces after cleaning. When all surfaces are clean, you can adjust the temperature settings on your Kenmore Elite refrigerator.
